Recommended Uses
Chemola™ Desco 111 (LT) can be used in the presence of diesel fuel, gas and well condensate, hydrogen sulfide, CO2, sour crude and standard crude. Recommended for frac valves.
Chemola™ Desco 111 (LT) is designed for use in valves under arctic conditions (to -75 F). 111-LT is extremely resistant to hydrogen sulfide and will not mix with water, preventing freeze-up in the valve. Because it provides good metal protection and is particularly water resistant, it is the recommended lubricant for frac valves.
Chemola™ Desco 111 (LT) can be used in the presence of diesel fuel, gas and well condensate, hydrogen sulfide, CO2, sour crude and standard crude. Recommended for frac valves.
Office: +1 281-606-0798
Cell: +1 281-661-0512
| Item Number | Unit Size | Quantity |
|---|---|---|
| 0825010CR | 14 oz cartridge | 10 per carton |
| 0825010QB | 10 lb can | |
| 0825020WMS | 20 lb pail | |
| 0825035WMS | 35 lb pail | |
| 0825120KG | 120 lb keg | |
| 0825400DR | 400 lb drum |
| Appearance | Black, smooth |
|---|---|
| NLGI | 1 |
| Penetration (ASTM D217) | 320-330 |
| Worked Penetration, 60x (ASTM D217) | 330-350 |
| Base Oil | Synthetic hydrocarbon |
| Base Oil Viscosity | 30 cSt at 40°C |
| Base Oil Pour Point | -80 °F (-62 °C) |
| Thickener | Inorganic |
| Additives | H2S/Corrosion Inhibitor |
| Solids Content | Graphite |
| Specific Gravity | 0.8 |
| Density (lb/gal) | 6.9 |
| Dropping Point (ASTM D566) | >500°F (260°C) |
| Flash Point | >470°F (243°C) |
| Temperature Range | -75°F to 350°F (-57°C to 177°C) |
| Four-Ball Wear (ASTM D2266) | 0.7mm |
| Four-Ball EP Weld Point (ASTM D2596) | 160 kgf |
