Recommended Uses
It is used in a wide variety of industrial applications including sealing threaded pipes or tool joints, gaskets, equipment joints and flanges.
CheckSeal™ 9R is a viscous, liquid thermosetting resin that cures upon the application of heat to form a very hard-set solid sealant, blocking leak paths. As it begins to cure, it forms a chemically resistant, insoluble solid that is effective in thread and gasket applications to 700˚F and with added fibers can be used in applications to 1500˚F.
It is used in a wide variety of industrial applications including sealing threaded pipes or tool joints, gaskets, equipment joints and flanges.
Office: +1 281-606-0798
Cell: +1 281-661-0512
| Item Number | Unit Size | Quantity |
|---|---|---|
| CS900111 | 2 lb can | |
| CS900311 | 45 lb pail | |
| CS900611 | 8 lb pail |
| Applications | Steam, boiler feed water, acids, alkalis, ammonia, hydraulic fluids, hydrocarbons, refrigerants and propane CAUTION: Some of the additives in the steam and bfw can kill the cure. |
|---|---|
| Temperature Range | -300°F to 700°F |
| Limitations | Should not be used at temps over 700°F (371°C) |
| Appearance | Black viscous liquid |
| Penetration (ASTM D217) | 415 |
| Specific Gravity | 1.15 |
| Density (lb/gal) | 9.6 |
| Injection Characteristics | Pourable liquid; flows well with minimum hydraulic pressure if injected |
| Cure | Hard cure over 250°F, rate depends on temperature |
| Long Term Changes | None |
| Storage | 70°F or lower; storage in freezer gives longer life |
