Pro Pak is an injectable packing compound containing inert fibers and particles blended into a synthetic binder. It is a highly versatile and durable self-molding packing for use in stuffing boxes and for all types of valves, pumps, and mechanical equipment. It can be either pre-formed manually or pumped into place with a high-pressure (10,000 p.s.i.) grease gun. PRO-Pak is chemically stable and resistant to most chemicals over a wide pH range.
| Unit Size |
|---|
| 10 lb pail |
| 40 lb pail |
| J Sticks |
| Other sizes available on request |
Pro Blast is recommended for Ball, Gate, and Plug valves found on gas and liquid transmission and gathering lines, as well as valves on gas distribution systems. It is a permanent packing that can be supplemented and does not need to be replaced.
Office: +1 281-606-0798
Cell: +1 281-661-0512
| Appearance | White, sticky, grainy |
|---|---|
| NLGI | 6 |
| Penetration (ASTM D217) | 80-90 |
| Base oil | Synthetic |
| Base oil viscosity | 650 cSt at 100°C |
| Base oil pour point | 41°F (5°C) |
| Solids content | Inert fibers and fillers |
| Specific gravity | 1.6 |
| Density (lb/gal) | 13.7 |
| Flash point | 392°F (200°C) |
| Temperature range | -20°F – 350°F (-29°C - 177°C) |
