Recommended Uses
Pro Pak HT is recommended for Ball, Gate and Plug valves found on gas and liquid transmission and gathering lines, as well as valve on gas distribution systems.
Pro Pak HT is a non-curing, pumpable packing that contains a blend of fibers and fillers in synthetic fluids. PRO-Pak HT is specifically designed for high-temperature hydrocarbon service. It is pumpable with a high-pressure (10,000 p.s.i) lubrication hand gun.
| Unit Size |
|---|
| 10 lb pail |
| 40 lb pail |
| J Sticks |
| Other sizes available on request |
Pro Pak HT is recommended for Ball, Gate and Plug valves found on gas and liquid transmission and gathering lines, as well as valve on gas distribution systems.
Office: +1 281-606-0798
Cell: +1 281-661-0512
| Appearance | Black |
|---|---|
| NLGI | >6 |
| Penetration (ASTM D217) | 50-60 |
| Base oil | Synthetic and natural esters |
| Base oil viscosity | 500 cSt at 40°C |
| Base oil pour point | -4°F (-16°C) |
| Solids content | Synthetic fibers, fillers |
| Specific gravity | 1.4 |
| Density (lb/gal) | 11.8 |
| Flash point | >550°F (288°C) |
| Temperature range | -40°F – 750°F (-40°C - 400°C) |
